Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Driveways & Roads · Alamance County · 30 min from Greensboro

Graham Farm Roads

Lanes you can drive a truck and trailer down in February — cut, ditched, piped and based.

Getting a truck and trailer to the back of a Graham farm in February takes a road, not a path. A&R Land Services builds and reopens farm roads, logging roads and access lanes across Alamance County — cut to grade, drained, piped at the crossings and stoned where it counts. We're about 30 minutes away in Greensboro.

A lot of the Graham tracts we work have old roads from a timber cut twenty or thirty years ago — the grade is still there under the pines and the honeysuckle. Reopening those is faster and cheaper than cutting new, and the crossings are usually already in place and just need cleaning or new pipe.

Long gravel farm road through bare winter woods with mulched edges and the track loader at the far end
Access road through the woods, edges cleared, machine at the top of the hill
Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes

Graham ground conditions and how they shape farm roads

South of town the land stays rural a long way toward Snow Camp and Saxapahaw, and that's where most of our Graham work is: twenty- to eighty-acre cattle and hay farms off NC-87, NC-49 and Swepsonville Road where pasture is being taken back from cedar and privet, fence rows are being cut out, and farm roads are going in. Closer to I-40/I-85 and the Graham-Hopedale Road corridor it's subdivision lot clearing and small commercial site prep. The Haw River frontage near Swepsonville and Saxapahaw has brought in some river-lot cleanup and trail work.

Around Graham-Mebane Lake, I-40 / I-85 and NC-49, the properties we're usually called to look like this:

  • Twenty- to eighty-acre cattle and hay farms off NC-87, NC-49 and Swepsonville Road reclaiming pasture from cedar and privet
  • Fence-row and hedgerow clearing on old farms where the wire has disappeared into honeysuckle
  • Flat Iredell clay fields that need ditching and swales before they'll carry hay equipment

What farm roads jobs look like around Graham

A typical Graham call for farm roads looks like this: Twenty- to eighty-acre cattle and hay farms off NC-87, NC-49 and Swepsonville Road reclaiming pasture from cedar and privet. We've handled that exact situation around NC-49 and Cedarock Park more times than we can count.

The other common one is Haul roads for timber sales and firewood cutting, which usually means a tighter work area and more care around what stays.

If your property is somewhere in between, send the address and we'll tell you which side of the line it falls on.

If you're just outside Graham — Mebane, Elon, Snow Camp or anywhere between — you're still inside our regular range.

Why Graham property owners call A&R

We put stone where it earns its keep and leave it off where firm clay will do. That keeps a Graham farm road priced like a farm road, not like a driveway.

For farm roads in Graham and the rest of Alamance County, call (336) 392-8138. We're about 30 minutes away in Greensboro and we build lanes that work in February.

Farm Roads in Graham: questions

Do farm roads need gravel the whole length?

Usually not. Firm, well-drained Piedmont clay with a proper crown and ditches will carry a tractor and a pickup most of the year without stone. Stone goes where the road sees the most traffic and the most water — the entrance, crossings and wet spots — and on the full length only if the road has to carry heavy trucks through the winter.

What areas do you build farm roads in?

Out of Greensboro, we cover the Triad and about an hour and twenty minutes in every direction — up to the Virginia line, west to Mount Airy and Elkin, south to Salisbury, Albemarle and Sanford, and east to Durham, Chapel Hill and Raleigh. Farm and timber country in every one of those directions is where this work is.

How far is A&R Land Services from Graham?

We're based in Greensboro, about 30 minutes from Graham. Alamance County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.

Do you handle farm roads near Graham-Mebane Lake and I-40 / I-85?

Yes. We work throughout Graham and the surrounding Alamance County area, including properties around Graham-Mebane Lake, I-40 / I-85 and NC-49. If you're outside the town limits, send the address and we'll confirm it's in range.

How do you approach farm roads on Graham ground?

Lanes that cross a draw, creek bottom or seasonal wet area is the most common version of it around Graham. We follow the lane with you, look at grade, wet spots, crossings and what the road has to carry. On a new route we flag it together so it follows the ground instead of fighting it. Terrain — flat ground cuts fast, side slopes take more shaping and ditching is the factor that moves the price most on Alamance County jobs, and we'll walk through it with you on site.

Farm Roads in Graham, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate