A&R cuts trails through Randolph County woods without a pile of brush beside the path or a burn permit. The mulcher grinds the corridor to chips, the roots hold the clay, and your Franklinville trail is walkable before the trailer's hooked up.
Red clay climbs in Randolph County woods get slick under ATV tires. We put the climbs where the ground is firmest, angle them across the slope, and gravel the ones that are going to be wet regardless.



Franklinville ground conditions and how they shape trail cutting
Rock is the main challenge. Slate is close enough to the surface on the ridges that grubbing stumps turns into a fight, so we mulch unless a structure is going on the spot. The Cid and Nanford flats near the creek heads stay wet in winter and need warm weather. Randolph County erosion rules apply past an acre, and anything on the river bluffs gets silt fence and a buffer strip because bare slate ground washes fast. The Deep River corridor is a county priority for water quality and inspectors do come through.
Around the old Franklinville mill, Ramseur and US-64, the properties we're usually called to look like this:
- Two to ten acre weekend-cabin and home lots along Andrew Hunter Road and Franklinville Road near the Deep River Rail Trail
- Hunting tracts between Franklinville and Ramseur needing lanes cut and old logging roads reopened
- Old mill-village lots in town that come up for sale under decades of sweetgum and privet
What trail cutting jobs look like around Franklinville
Around US-64, the properties that call us for trail cutting tend to be two to ten acre weekend-cabin and home lots along Andrew Hunter Road and Franklinville Road near the Deep River Rail Trail.
Closer to Andrew Hunter Road it's more often equipment lanes to back fields, timber and ponds — different layout, same machine, and the estimate reflects the difference honestly.
Franklinville isn't one kind of ground, and we don't price it like it is.
Ramseur, Asheboro and Liberty are in the same loop as Franklinville for us — same crew, same pricing basis.
Why Franklinville property owners call A&R
The owner cuts every Franklinville trail himself. Clark is a veteran and a working firefighter, and he's laid out enough routes through Randolph County woods to know where a trail will hold and where it'll wash.
Open up your Franklinville property. Reach out to A&R Land Services for trail and access path cutting anywhere in Randolph County.
Trail Cutting in Franklinville: questions
Will the trail turn into mud?
Not if it's routed right. A trail that runs straight down a slope on Piedmont clay becomes a gully; one that follows the contour and crosses slopes at an angle sheds water. We route for drainage, keep the mulch layer on the path, and put gravel on any stretch that's going to be wet no matter what — usually creek approaches and the bottom of climbs.
Can you cut a trail across a creek?
Yes. We pick the crossing where the banks are low and the bottom is firm, keep the clearing narrow inside the buffer, and either set stone for a ford or install a culvert with fill over it, depending on how much water runs and how often you need to cross it in the wet. The excavator and the dump trailer handle it on the same visit.
How far is A&R Land Services from Franklinville?
We're based in Greensboro, about 40 minutes from Franklinville. Randolph County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.
Do you handle trail cutting near the old Franklinville mill and Ramseur?
Yes. We work throughout Franklinville and the surrounding Randolph County area, including properties around the old Franklinville mill, Ramseur and US-64. If you're outside the town limits, send the address and we'll confirm it's in range.
What does trail cutting typically involve on a Franklinville property?
Connecting a house to a creek, pond or picnic spot through the woods is the most common version of it around Franklinville. A written plan with the trail's length and width, where crossings are, any gravel or culvert work included, and the price. Trails are quoted by the job after the walk. Slope and how much routing work the terrain needs is the factor that moves the price most on Randolph County jobs, and we'll walk through it with you on site.