Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Forestry Mulching & Land Management · Randolph County · 30 min from Greensboro

Liberty Trail Cutting

Walking trails, ATV paths and equipment access cut through the woods and left mulched.

If you can't get to the back of your Liberty property without a machete, we'll cut the route. Veteran and fireman owned, based in Greensboro, and trail work on Randolph County recreational land is some of the most enjoyable work we do.

Hunting tracts around Liberty want trails that get you to the stand without walking through the bedding cover. We route those with the wind and the terrain in mind and keep the corridor just wide enough for a quiet walk or a UTV.

Trail entrance cut from a gravel drive into the woods with brush mulched back
Trail opened off the gravel drive
Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes

Liberty ground conditions and how they shape trail cutting

Our Liberty work splits between the megasite boom and the farms. Along Old 421 Road, Kimesville Road and NC-49, investors and relocating families are buying wooded tracts of two to fifty acres and need them cleared, graded and roaded, and some of that is commercial clearing for contractor yards and supplier warehouses near the plant. Out toward Staley and Patterson Grove it is still poultry houses, pasture gone to cedar, and fence rows along Sandy Creek Road that need to be found and reopened. The Liberty Antiques Festival grounds and the surrounding farms see a lot of bush-hogging and field-edge clearing every year too.

Around US-421, Sandy Creek and Sandy Creek Road, the properties we're usually called to look like this:

  • Wooded 2–50 acre tracts along US-421, Old 421 Road and Kimesville Road being cleared for homes and investment near the Toyota battery plant
  • Poultry and cattle farms toward Staley with pasture gone to cedar and fence rows lost along Sandy Creek Road
  • Field edges and festival-ground acreage needing seasonal bush-hogging and brush knockdown

What trail cutting jobs look like around Liberty

If you're near Sandy Creek Road or Liberty Antiques Festival grounds, odds are your situation is one we've already worked: wooded 2–50 acre tracts along US-421, Old 421 Road and Kimesville Road being cleared for homes and investment near the Toyota battery plant, or fire and emergency access through dense acreage.

The trail cutting approach for Randolph County ground is the same either way — look first, quote in writing, bring the right attachment, walk it with you when it's done.

If you're just outside Liberty — Climax, Siler City, Julian or anywhere between — you're still inside our regular range.

Why Liberty property owners call A&R

A mulched trail in Liberty is clean from day one — no windrow of brush along the edge, no stumps standing up, no burn pile smoldering by the path. Just a corridor through the woods with a chip floor.

Trail cutting in Randolph County starts with a walk through the woods. Get in touch and let's lay it out.

Trail Cutting in Liberty: questions

Can you cut a trail across a creek?

Yes. We pick the crossing where the banks are low and the bottom is firm, keep the clearing narrow inside the buffer, and either set stone for a ford or install a culvert with fill over it, depending on how much water runs and how often you need to cross it in the wet. The excavator and the dump trailer handle it on the same visit.

How much does it cost to cut a trail through the woods?

Trails are priced by length, width and how thick the woods are, with creek crossings and gravel as the add-ons. A quarter mile of walking path through open hardwoods is a short day. A mile of ten-foot UTV loop through privet with two creek crossings and gravel on the climbs is a multi-day job. We flag the route with you and give a written number. Estimates are free.

How far is A&R Land Services from Liberty?

We're based in Greensboro, about 30 minutes from Liberty. Randolph County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.

Do you handle trail cutting near US-421 and Sandy Creek?

Yes. We work throughout Liberty and the surrounding Randolph County area, including properties around US-421, Sandy Creek and Sandy Creek Road. If you're outside the town limits, send the address and we'll confirm it's in range.

How do you approach trail cutting on Liberty ground?

UTV, ATV and dirt bike trails on recreational land is the most common version of it around Liberty. Creek crossings get stone or a culvert if scoped. Wet stretches and climbs get gravel if you want them drivable year-round. We make a final pass to knock stubs flush and leave a clean mulch floor. Trees on the route that need felling and handling is the factor that moves the price most on Randolph County jobs, and we'll walk through it with you on site.

Trail Cutting in Liberty, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate