If the city sent a letter about your Gibsonville lot or the back field got away from you this summer, we'll knock it down. Veteran and fireman owned, based in Greensboro, and bush hogging in Guilford / Alamance County is the fastest-scheduling work we do.
Pasture edges in Guilford / Alamance County — along the creek, under the tree line, around the pond — are where the tractor stops and the brush starts. On Gibsonville farms we mow those strips with the track machine so the pasture stays the size it was fenced to be.



Gibsonville ground conditions and how they shape bush hogging
Gibsonville is where the soil changes under your feet. West of town it's still Cecil red clay, but moving east toward Elon and Burlington you cross onto a belt of Enon, Iredell and Mecklenburg soils formed over diabase and gabbro. Iredell is the one to respect — a sticky gray clay that swells wet, shrinks dry and drains about as well as a parking lot. Old-timers call it blackjack land. Travis Creek and several small branches feed toward the Haw River north of town, and those low fields are the last to dry in spring. Growth on fallow land here is loblolly, red cedar, sweetgum and a privet understory.
Around NC-61, Travis Creek and Haw River, the properties we're usually called to look like this:
- One- to two-acre build lots on the Guilford side where subdivisions are pushing out from McLeansville and Whitsett
- Mill-village homes with wooded back lots full of privet and volunteer sweetgum
- Fence-line and hedgerow clearing on the Alamance side where honeysuckle has buried the wire
What bush hogging jobs look like around Gibsonville
If you're near Haw River or Boone Station Road, odds are your situation is one we've already worked: one- to two-acre build lots on the Guilford side where subdivisions are pushing out from McLeansville and Whitsett, or pasture edges, fence rows and corners a tractor can't reach.
The bush hogging approach for Guilford / Alamance County ground is the same either way — look first, quote in writing, bring the right attachment, walk it with you when it's done.
Whitsett, Browns Summit and Burlington are in the same loop as Gibsonville for us — same crew, same pricing basis.
Why Gibsonville property owners call A&R
The track machine mows ground in Gibsonville that a tractor-mounted hog can't — steep banks, soft bottoms, tight corners around buildings. You get the whole field cut, not just the part the tractor could reach.
Field mowing in Guilford / Alamance County is easiest on a schedule. Get in touch and we'll set up spring and late-summer cuts.
Bush Hogging in Gibsonville: questions
What's the difference between bush hogging and forestry mulching?
The cutter handles grass, weeds, briars and saplings up to two or three inches, and leaves the material chopped on the ground. The mulcher grinds brush and trees up to eight or ten inches into chips. If your field has been let go long enough that the saplings are thicker than your thumb, it's a mulching job, and we'll tell you that rather than tear up the cutter.
How often should a field be bush hogged?
Twice a year keeps most Piedmont fields open — once in late spring after the first flush and once in late summer before the sweetgum and pine saplings harden off. Once a year works on fields that are mostly grass. Hay fields and wildlife ground have their own timing, and we'll work around nesting season if it applies.
How far is A&R Land Services from Gibsonville?
We're based in Greensboro, about 20 minutes from Gibsonville. Guilford / Alamance County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.
Do you handle bush hogging near NC-61 and Travis Creek?
Yes. We work throughout Gibsonville and the surrounding Guilford / Alamance County area, including properties around NC-61, Travis Creek and Haw River. If you're outside the town limits, send the address and we'll confirm it's in range.
What should I expect from a bush hogging job in Guilford / Alamance County?
Fields between tenants or between crops is the most common version of it around Gibsonville. We look at the growth height and type, check for hidden fence, rock, wire and junk, and find the wet spots. If the growth is past what a cutter should handle, we'll tell you it's a mulching job. Access and how far the field is from where we can unload is the factor that moves the price most on Guilford / Alamance County jobs, and we'll walk through it with you on site.