Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Drainage & Erosion · Guilford / Alamance County · 20 min from Greensboro

Gibsonville French Drains

Stone, fabric, perforated pipe and real fall — a drain that still works ten years from now.

Groundwater on a Gibsonville hillside lot doesn't care how nice the house is — it moves downhill through the soil until something stops it. A curtain drain is that something. We build them for homeowners across Guilford / Alamance County who are tired of a damp crawlspace every spring.

Around Gibsonville, the clay subsoil means a French drain has to be built as a collector that carries water to daylight, not a pit that lets it soak in. Every drain we build in Guilford / Alamance County is cut with fall checked along the run and ends somewhere the water can actually leave — a ditch, a draw, a pop-up emitter well away from the house.

Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes
Freshly cleared and rough-graded backyard lot with track marks, mature trees left standing beside a house
Backyard lot cleared and rough graded, shade trees kept

Gibsonville ground conditions and how they shape french drains

Most of our Gibsonville work is on the edges — rural residential lots along NC-61 and NC-100, small farms off Burlington Road that are being split up, and the ground around the old textile mill village where homeowners want wooded back lots opened up. The Guilford side is seeing subdivisions push out from McLeansville and Whitsett, so we clear a lot of one- to two-acre build lots there. On the Alamance side there are still working hay and cattle operations where the fence lines have disappeared into honeysuckle and we get called to mulch them back out.

Around Minneola Mill, Burlington Avenue and Burlington Road (US-70), the properties we're usually called to look like this:

  • One- to two-acre build lots on the Guilford side where subdivisions are pushing out from McLeansville and Whitsett
  • Mill-village homes with wooded back lots full of privet and volunteer sweetgum
  • Fence-line and hedgerow clearing on the Alamance side where honeysuckle has buried the wire

What french drains jobs look like around Gibsonville

A typical Gibsonville call for french drains looks like this: One- to two-acre build lots on the Guilford side where subdivisions are pushing out from McLeansville and Whitsett. We've handled that exact situation around Burlington Road (US-70) and Eastern Guilford High School more times than we can count.

The other common one is Low lawn areas with no surface slope to drain them, which usually means a tighter work area and more care around what stays.

If your property is somewhere in between, send the address and we'll tell you which side of the line it falls on.

Burlington, Graham and Whitsett are in the same loop as Gibsonville for us — same crew, same pricing basis.

Why Gibsonville property owners call A&R

We use non-woven fabric around the stone, washed #57 stone, and we check grade along the trench instead of eyeballing it. Those details are why our drains in Guilford / Alamance County are still working years later and why we don't get callbacks.

Send photos of the wet area on your Gibsonville property and we'll tell you whether a French drain is the right fix before we schedule the visit.

French Drains in Gibsonville: questions

Do you call 811 before digging a French drain?

Every time. North Carolina law requires it and it's free. 811 marks public gas, electric, water, sewer and communications lines. It doesn't mark private lines — septic, well, irrigation, a line to a detached shop — so we'll ask you about those and locate them carefully before the bucket goes in.

Where does the water go at the end of a French drain?

To daylight on a slope, a roadside ditch, a natural draw on your property, a dry creek bed, or a pop-up emitter in the lawn well away from the house. It can't be directed onto a neighbor in a way that damages them, and it can't discharge inside a stream buffer. We find the outlet before we quote, because without one the drain isn't worth building.

How far is A&R Land Services from Gibsonville?

We're based in Greensboro, about 20 minutes from Gibsonville. Guilford / Alamance County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.

Do you handle french drains near Minneola Mill and Burlington Avenue?

Yes. We work throughout Gibsonville and the surrounding Guilford / Alamance County area, including properties around Minneola Mill, Burlington Avenue and Burlington Road (US-70). If you're outside the town limits, send the address and we'll confirm it's in range.

How do you approach french drains on Gibsonville ground?

Water seeping into crawlspaces and basements from the uphill side is the most common version of it around Gibsonville. We look at the wet area, where the water enters it and how much fall there is to a place it can leave. If there's no outlet, we talk about alternatives before anyone digs. Restoration of lawn, beds or hardscape disturbed by the trench is the factor that moves the price most on Guilford / Alamance County jobs, and we'll walk through it with you on site.

French Drains in Gibsonville, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate