Grading in Gibsonville means dealing with the same clay every property in Guilford / Alamance County sits on — it holds water, it compacts hard, and it punishes anybody who shapes it at the wrong moisture. We know the ground, we're about 20 minutes from Greensboro, and we grade it the way it has to be done here.
The lots we grade around Gibsonville usually share a problem: thin topsoil over clay that won't absorb much of anything. Water that lands on it has to run off, which means the slope has to be deliberate. We set it with a laser, not by eye, and we take special care at the foundation line where a few inches of fall makes the difference.



Gibsonville ground conditions and how they shape land grading
On Iredell ground we'll tell you straight: don't grade it wet. It turns to grease, ruts three feet deep and sets like concrete when it dries. We wait for a solid dry week and we use a track machine. Drainage work is a bigger share of the job here than in most towns — French drains, swales and ditch cleaning to get water off the flat clay and moving toward the creek. Since the town spans two counties, we check which erosion control office has jurisdiction before we start anything over an acre.
Around NC-61, Travis Creek and Minneola Mill, the properties we're usually called to look like this:
- One- to two-acre build lots on the Guilford side where subdivisions are pushing out from McLeansville and Whitsett
- Fence-line and hedgerow clearing on the Alamance side where honeysuckle has buried the wire
- Mill-village homes with wooded back lots full of privet and volunteer sweetgum
What land grading jobs look like around Gibsonville
Around Minneola Mill, the properties that call us for land grading tend to be one- to two-acre build lots on the Guilford side where subdivisions are pushing out from McLeansville and Whitsett.
Closer to Boone Station Road it's more often driveway, parking and gravel lot base shaping — different layout, same machine, and the estimate reflects the difference honestly.
Gibsonville isn't one kind of ground, and we don't price it like it is.
Browns Summit, Burlington and Elon are in the same loop as Gibsonville for us — same crew, same pricing basis.
Why Gibsonville property owners call A&R
We use a laser on every Guilford / Alamance County grading job, from a small yard fix to a full pad. Plenty of outfits grade by eye and call it close enough. In clay that holds water, close enough is how you end up with the same puddle in a different spot.
If your Gibsonville property needs shaping, send us the address and a photo or two, or give us a call at (336) 392-8138. We'll come walk it.
Land Grading in Gibsonville: questions
What's the difference between grading and leveling?
Leveling makes ground flat. Grading makes it slope on purpose. A truly level yard holds water in our soils, so almost every job that starts as "I want it level" ends up as "I want it smooth with a gentle fall away from the house." That's grading, and it's what we do.
What areas do you grade in?
Greensboro is home base, and we work the whole Triad plus about an hour and twenty minutes out — north to the Virginia line, west to Mount Airy and Elkin, south to Salisbury, Albemarle and Sanford, and east through Durham and Chapel Hill to Raleigh.
How far is A&R Land Services from Gibsonville?
We're based in Greensboro, about 20 minutes from Gibsonville. Guilford / Alamance County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.
Do you handle land grading near NC-61 and Travis Creek?
Yes. We work throughout Gibsonville and the surrounding Guilford / Alamance County area, including properties around NC-61, Travis Creek and Minneola Mill. If you're outside the town limits, send the address and we'll confirm it's in range.
What does land grading typically involve on a Gibsonville property?
Land being prepped to list, where a smooth lot shows better is the most common version of it around Gibsonville. You get a written description of the cuts and fills, whether topsoil or fill dirt is being brought in, how the finish is left, and the price. If sediment control or a permit applies, it's called out here. Whether topsoil, fill or stone has to be brought in or hauled off is the factor that moves the price most on Guilford / Alamance County jobs, and we'll walk through it with you on site.