Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Forestry Mulching & Land Management · Guilford County · Home base from Greensboro

Greensboro Trail Cutting

Walking trails, ATV paths and equipment access cut through the woods and left mulched.

A&R cuts trails through Guilford County woods without a pile of brush beside the path or a burn permit. The mulcher grinds the corridor to chips, the roots hold the clay, and your Greensboro trail is walkable before the trailer's hooked up.

Red clay climbs in Guilford County woods get slick under ATV tires. We put the climbs where the ground is firmest, angle them across the slope, and gravel the ones that are going to be wet regardless.

Trail entrance cut from a gravel drive into the woods with brush mulched back
Trail opened off the gravel drive
Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes

Greensboro ground conditions and how they shape trail cutting

The big growth corridors are northwest toward Summerfield and Oak Ridge along US-220 and Battleground Avenue, east around McLeansville and the Piedmont Triad Farm, and south along US-421 toward the airport-adjacent industrial parks. Most of our Greensboro calls are two- to ten-acre infill parcels inside the loop (I-840/I-73) that were skipped over during earlier development because they were wooded or wet, plus larger tracts out past Lake Brandt and Lake Townsend where people are building on former tobacco farms.

Around Reedy Fork, Lawndale Drive and Battleground Avenue (US-220), the properties we're usually called to look like this:

  • New-construction home sites northwest of town along US-220, Lake Brandt Road and Strawberry Road where lots are 1–3 wooded acres
  • Church and school properties with wooded back acreage they want opened up for parking, ball fields or trails
  • Commercial outparcels around Wendover Avenue, Gate City Boulevard and the airport that need brush knocked down and rough grading before a survey or sale

What trail cutting jobs look like around Greensboro

If you're near Battleground Avenue (US-220) or Wendover Avenue, odds are your situation is one we've already worked: new-construction home sites northwest of town along US-220, Lake Brandt Road and Strawberry Road where lots are 1–3 wooded acres, or connecting a house to a creek, pond or picnic spot through the woods.

The trail cutting approach for Guilford County ground is the same either way — look first, quote in writing, bring the right attachment, walk it with you when it's done.

We also cover trail cutting in Summerfield, Browns Summit and Mcleansville, so if you've got property in more than one spot we can often batch the work.

Why Greensboro property owners call A&R

The owner cuts every Greensboro trail himself. Clark is a veteran and a working firefighter, and he's laid out enough routes through Guilford County woods to know where a trail will hold and where it'll wash.

Open up your Greensboro property. Reach out to A&R Land Services for trail and access path cutting anywhere in Guilford County.

Trail Cutting in Greensboro: questions

How much does it cost to cut a trail through the woods?

Trails are priced by length, width and how thick the woods are, with creek crossings and gravel as the add-ons. A quarter mile of walking path through open hardwoods is a short day. A mile of ten-foot UTV loop through privet with two creek crossings and gravel on the climbs is a multi-day job. We flag the route with you and give a written number. Estimates are free.

Do you remove the stumps on the trail?

Stumps inside the corridor get mulched to grade — low enough that they won't catch a tire, a hoof or a boot. On stretches where you want bare dirt for gravel we pull them with the excavator. Most trail customers are fine with mulched stumps and a chip floor.

How far is A&R Land Services from Greensboro?

Greensboro is our home base. We're a Greensboro company, so mobilization in and around the city is as quick as it gets.

Do you handle trail cutting near Reedy Fork and Lawndale Drive?

Yes. We work throughout Greensboro and the surrounding Guilford County area, including properties around Reedy Fork, Lawndale Drive and Battleground Avenue (US-220). If you're outside the town limits, send the address and we'll confirm it's in range.

How do you approach trail cutting on Greensboro ground?

Walking and running loops on wooded homesites is the most common version of it around Greensboro. Creek crossings get stone or a culvert if scoped. Wet stretches and climbs get gravel if you want them drivable year-round. We make a final pass to knock stubs flush and leave a clean mulch floor. Gravel on climbs, wet stretches or the whole trail is the factor that moves the price most on Guilford County jobs, and we'll walk through it with you on site.

Trail Cutting in Greensboro, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate