Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Grading · Guilford / Randolph County · 25 min from Greensboro

Land Grading for Julian & Guilford / Randolph County

Water goes where it should, dirt stays where you put it, and the ground is ready for what's next.

Most grading calls we get from Julian start with a puddle. Water against a foundation, a soft spot in the yard, a drive that washes every storm. We're about 25 minutes away in Greensboro, and fixing that kind of thing is a one-visit job for a track loader with a box blade and a laser.

Around Julian we see a lot of grading that was done once by a builder with a bucket and never touched again. Settling over the years turns that into low spots against the crawl space. A box blade pass with the right slope and a load of fill fixes most of them in a day.

Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes
Freshly cleared and rough-graded backyard lot with track marks, mature trees left standing beside a house
Backyard lot cleared and rough graded, shade trees kept

Julian ground conditions and how they shape land grading

Jurisdiction matters out here because the county line runs through town; Guilford and Randolph have different erosion control processes, and we check which side a parcel falls on before we start. The slate-belt ground is kind to equipment — it carries a machine in weather that would stop us up north — but it needs seed and cover the same week it's graded. The Alamance Creek bottoms are the exception; we don't push grading down there until summer. Rock near the surface on the ridges can make trenching slow going.

Around Old Julian Road, NC-62 and Big Alamance Creek, the properties we're usually called to look like this:

  • Hunting and timber land needing food plot edges, shooting lanes and farm roads
  • Horse properties along NC-62 needing fence lines mulched and paddocks leveled
  • Creek-bottom fields along Big Alamance Creek that need ditching before they'll carry hay equipment

What land grading jobs look like around Julian

A typical Julian call for land grading looks like this: Hunting and timber land needing food plot edges, shooting lanes and farm roads. We've handled that exact situation around Big Alamance Creek and Southeast Guilford area more times than we can count.

The other common one is Land being prepped to list, where a smooth lot shows better, which usually means a tighter work area and more care around what stays.

If your property is somewhere in between, send the address and we'll tell you which side of the line it falls on.

We also cover land grading in Staley, Whitsett and Burlington, so if you've got property in more than one spot we can often batch the work.

Why Julian property owners call A&R

Our grading estimates in Julian describe the cuts, the fills, the material coming in or going out, and the finish you'll get. Nothing vague. The number in the estimate is the number on the invoice.

A&R Land Services grades across Guilford / Randolph County from our base in Greensboro. Contact us and we'll get your Julian lot on the schedule.

Land Grading in Julian: questions

How much does grading cost in Greensboro NC?

It swings a lot. Correcting the slope around one side of a house is a few hours with one machine, and that's the low end. Rough and finish grading a full acre with fill brought in is a multi-day job and sits at the high end. The biggest cost drivers are how much dirt moves and whether material is trucked in or out. We walk the site and give a written number — no per-square-foot guesses over the phone.

Do I need a permit to grade my property in NC?

For most residential grading under an acre, no. If you disturb more than an acre, North Carolina's sediment and erosion control rules kick in and you'll need an approved plan, usually through the county or the state Division of Energy, Mineral and Land Resources. Towns can have their own stormwater rules on smaller areas. We'll tell you if your job trips a threshold.

How far is A&R Land Services from Julian?

We're based in Greensboro, about 25 minutes from Julian. Guilford / Randolph County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.

Do you handle land grading near Old Julian Road and NC-62?

Yes. We work throughout Julian and the surrounding Guilford / Randolph County area, including properties around Old Julian Road, NC-62 and Big Alamance Creek. If you're outside the town limits, send the address and we'll confirm it's in range.

What does land grading typically involve on a Julian property?

Water pooling against a foundation or crawl space vent is the most common version of it around Julian. We look at the site after a rain if we can, note where it pools and where it flows, check the existing slope with a laser, and talk through what the ground has to do once we're gone. Obstacles: stumps, roots, buried debris, utilities is the factor that moves the price most on Guilford / Randolph County jobs, and we'll walk through it with you on site.

Land Grading in Julian, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate