Veteran & Fireman Owned · Land clearing, forestry mulching & grading · Greensboro, NC & the Piedmont TriadCall or text (336) 392-8138
Forestry Mulching & Land Management · Caswell County · 55 min from Greensboro

Trail Cutting for Yanceyville & Caswell County

Walking trails, ATV paths and equipment access cut through the woods and left mulched.

Trail cutting in Yanceyville is as much routing as it is clearing. We flag the path with you, follow the contours so it drains, pick the creek crossings where the banks are low, and then mulch the corridor to a clean floor.

Yanceyville homesites on bigger lots often have a creek or a bluff at the back that the family's never actually visited. A walking trail down to it is a half-day job that changes how the property gets used.

Trail entrance cut from a gravel drive into the woods with brush mulched back
Trail opened off the gravel drive
Kubota SVL97-2 track loader with Fecon forestry mulcher head working through brush and saplings in a Piedmont hardwood stand
Fecon mulcher head on the SVL97 — one pass takes brush and saplings to chips
Forestry mulcher threading between mature oak trunks while clearing understory
Selective clearing — keeper hardwoods stay, everything under them goes

Yanceyville ground conditions and how they shape trail cutting

Helena and Vance flats around Yanceyville are the worst winter mud in our territory and we are honest about that; low ground is a May-through-November job. The Cecil ridges can be mulched year-round. Caswell County's erosion rules apply past an acre and Farmer Lake has a watershed designation that tightens things on the east side of town, so we buffer the creeks and seed as we go. Old tobacco ground often has a rusted barn, a pack house and a trash pile out back that we handle while the equipment is there.

Around Moon Creek, Prospect Hill and the Caswell County Courthouse square, the properties we're usually called to look like this:

  • Hunting tracts of 50–500 acres along NC-62, NC-86 and US-158 needing lanes, food plots, interior roads and firebreaks
  • Old tobacco homeplaces being cleared for families moving back, usually with a collapsed barn or pack house to take down
  • Hobby farms of 20–50 acres being set up for horses, goats or a market garden

What trail cutting jobs look like around Yanceyville

Most of our trail cutting work in Yanceyville comes from two directions. First, hunting tracts of 50–500 acres along NC-62, NC-86 and US-158 needing lanes, food plots, interior roads and firebreaks. Second, fire and emergency access through dense acreage.

Both show up regularly along the Caswell County Courthouse square and NC-62, and both are jobs we can usually walk, quote and schedule inside a couple of weeks.

Danville, Milton and Reidsville are in the same loop as Yanceyville for us — same crew, same pricing basis.

Why Yanceyville property owners call A&R

If the trail needs a culvert at the branch, gravel on the climb, or a wider lane for the tractor on one stretch, we do it in the same Caswell County trip.

Call or text (336) 392-8138 to set up a free trail cutting estimate in Yanceyville. We'll walk the woods with you and flag the route before we quote it.

Trail Cutting in Yanceyville: questions

What areas do you cut trails in?

Greensboro and roughly an hour and twenty minutes out — the Triad, north to the Virginia line, west to Mount Airy and Elkin, south to Salisbury, Albemarle and Sanford, and east to Durham, Chapel Hill and Raleigh. Most of our trail work is on recreational and hunting land in the rural counties around that ring.

Do you remove the stumps on the trail?

Stumps inside the corridor get mulched to grade — low enough that they won't catch a tire, a hoof or a boot. On stretches where you want bare dirt for gravel we pull them with the excavator. Most trail customers are fine with mulched stumps and a chip floor.

How far is A&R Land Services from Yanceyville?

We're based in Greensboro, about 55 minutes from Yanceyville. Caswell County is inside the radius we work every week, so there's no long-haul mobilization charge built into your estimate.

Do you handle trail cutting near Moon Creek and Prospect Hill?

Yes. We work throughout Yanceyville and the surrounding Caswell County area, including properties around Moon Creek, Prospect Hill and the Caswell County Courthouse square. If you're outside the town limits, send the address and we'll confirm it's in range.

What does trail cutting typically involve on a Yanceyville property?

UTV, ATV and dirt bike trails on recreational land is the most common version of it around Yanceyville. The mulcher follows the flags, taking brush and saplings to grade and working around the trees you're keeping. Low limbs that would catch a rider get cut. Larger trees on the route get a decision — route around or fell and grapple off. Trees on the route that need felling and handling is the factor that moves the price most on Caswell County jobs, and we'll walk through it with you on site.

Trail Cutting in Yanceyville, done right the first time.

Call, text, or send a few photos and the address. Clark walks the property with you and puts a real number on the work.

(336) 392-8138Request an estimate